Marbled Pumpkin with Acrylic Paint Pouring

This project was inspired by a YouTube comment on a paint pouring video. Can I do this technique on a pot or a lampshade are the two that come to mind. Honestly I’m not sure and in this post I’ll share my thoughts as well as how I ended up with a marble-y pumpkin for my table!

Continue reading “Marbled Pumpkin with Acrylic Paint Pouring”

Fall Table Runner: iron-on vinyl accents with ScanNCut DX

In my last post I shared a table runner how-to, and today I’m back to share how I’m using the new ScanNCut DX to add iron-on glitter vinyl to this table runner. If you don’t feel like making your own guess what? You could totally start from here and create your own iron-on designs to stick onto a premade table runner, table cloth, or place mat!

The how-to is so easy – and I have to tell you this was that took me from really liking the new ScanNCut DX to making my jaw drop! These designs just FYI are built into the machine I have – score for quick! But the real wow happens because the machine’s blade auto senses and with the push of one button cuts the vinyl, but not the carrier sheet. I couldn’t believe how beautifully my vinyl cut and how well this project worked!

Here is a link to my YouTube video tutorial.

I placed my patterns on the white area for the most “pow” and despite all the color and pattern already going on I have to tell you, I really like what the glittery designs add! These hearts are so spectacular you can be sure you’ll see more of them from me in the future.

Speaking of love – I can’t say enough good things about the new ScanNCut DX. If you’re on the fence – keep watching. Because I have a wealth of videos and tutorials coming to celebrate fall, this crafty new machine, and creativity in general! I’ve been so inspired and creating up a storm around here.

To recap the steps to iron-on glitter vinyl like this: 

  1. Select and cut out your pattern, careful to not cut the carrier sheet.
  2. Pick or ‘weed’ out the elements you do not wish to use.
  3. Iron on the design to your project as desired. It is recommended to place a piece of fabric between your carrier sheet and the iron.
  4. Remove the carrier sheet, double checking that your design is transferred fully.
  5. ENJOY!

For more about this machine stay tuned, and check out all the nitty gritty on the Brother website. 

The usual disclaimer that I am a paid consultant for Brother, but all ideas and opinions expressed by me are always 100% my own!

Fall Table Runner

One of my personal goals is to sew more! I’ve got a great machine and I intend to use it. Not to mention I love the challenge and mixing some fabric into my normally paper filled craft life. Today I’m sharing the first of two posts about this table runner. Next post? I’ll share adding iron-on fun! For today though, let’s focus on basic building.

I am a VERY basic sewer, so as I ease in things with simple how-to suit me well. In this case I cut a bunch of scraps all at least 18in wide, and sewed them together to create a patchwork of patterns.

It requires sewing the line of one ‘backside’ to another. Now note – you don’t have to be on the edge! In fact sometimes I’d go a few inches in if it was easier for me to navigate around a rugged cut. Then, simply cut off the excess fabric so that later when you go to iron and sew together the finished piece there isn’t excess in the way (see below).

I just kept on stitching pieces together until I had a piece long enough. Now here’s a fact – you can stop here. Iron the raw ends under, go put it on your table. It’ll look lovely and nobody will be the wiser that it’s the unfinished top of a table runner. Folding + ironing fabrics is one of my favorite tricks! Alas, it is time for me to expand my skills so I continue!

At this point I ironed everything so the seams would be flat, and marked where I wanted the width of my table runner to be. I did this initially to save time so I didn’t have to measure every piece or make sure they were all even – and this method for me paid off.

Once I marked where I wanted the table runner to be, I stitched the two long sides, leaving the remaining (end) of the table runner open. With this done, I tucked the raw ends in and once again ironed this flat. YES – this one end is still open – but that’s ok!

It’s ok because I intended to stitch trim along this end, creating a decorative end but also effectively sealing up that fourth side without any fuss or difficulty! I’m all for easy solutions when it comes to sewing because I’m just learning the ropes around here.

So I got out some fun trim I’d been saving, and stitched it on!

At this point I have a reversible table runner ready for action… or is it? I think some fun iron-ons would add to it and I’ll share that how-to tomorrow. In the meantime I hope you enjoyed this and my unusual table runner color choices for fall. I’m testing out new to me colors and designs, and I’ll be sure to share a photo of how the room looks in my ‘around here’ post in a week or two!

What are you crafting or learning these days? I’d love to hear!